________________________________________ ___________________________________________________ ___________________________________ 1 of 2 sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com rohs specifications all specifications are typical at nominal input, fu ll load at 25 c unless otherwise stated . ac input 100-240vac, +/-10%, 47-63 hz, 1 ? mtbf > 100k hours (calculated, 25 c at full load) input current 115vac: 3a, 230vac: 1.5a hold - up time 20 ms min. @ 115vac inrush current 75a peak @ 264vac, cold start overvoltage protection 130% of nominal output voltage input fuse 4.0a, 250v internal primary current fuse provided overl oad protection 120-180% of full rated load, auto- recovery efficiency meets international efficiency level v short circuit protection provided with no damage to s upply output vol tage see chart overtemperature protection latched, requires input recyclin g output power see chart input harmonics meets iec61000-3-2 ripple and noise 1% pk-pk max., 20mhz bw safety standards iec/en/ul60601-1 & en/iec/ul60950-1 2 nd edition line/load regulation including cord: line: +/- 1%, load: +/-5% switching frequency 40khz to13 0khz , variable transient response maximum deviation of 5% with 25% to 75% load change and 0.2a/usec slew rate isolation input-output: 4000vac, inpu t-gnd: 1500vac, output-gnd: 700vdc minimum load not required operating temperature 0 to 40 c full load derate linearly to 40% of full rated load at 7 0 c case material black 94v0 polycarbonate temperature coefficient 0.04% per c, maximum case di mensions see mechanical drawing storage temperature -40 c to +85 c altitude - 500 to 10,000 ft, operating; -500 to 40,000 ft, non -operating rela tive humidity 5% to 95%, non-condensing emi/emc compliance conducted emissions fcc part 15 subpart b, class b, en55011 class b, en 55024 radiated emissions fcc part 15 subpart b, class b, en55011 class b, en 55024 voltage fluctuations en61000-3-3 complies (dmax<6%) static discharge immunity en61000-4-2, 6kv contact discharge, 8kv air dischar ge. criteria a radiated rf immunity en61000-4-3, 3v/m. criteria a eft/burst immunity en61000-4-4, 2kv/5khz. criteria a line surge immunity en61000-4-5, 1kv differential, 2kv common-mode, cri teria a conducted rf immunity en61000-4-6, 3vrms, criteria a power frequency magnetic field immunity en61000-4-8, 3a/m, criteria a voltage dip immunity en61000-4-11, 0 % vnominal, 0.5 cycle; 40% vnominal, 5 cycles; 70% vnominal, 25 cycles: criteria a line frequency harmonics en61000-3-2, class a, b, c & d MENT1150 universal input 150 watt series ? 100-240vac universal input ? meets eisa2007, cec efficiency level v, eu (ec) no 278/2009 phase ii ? desktop style with led power-on indicator ? 12v to 48v single output models, up to 150w ? modified and custom designs available ? regulated output with low ripple ? impact-resistant polycarbonate enclosure ? no load power consumption <0.5w ? meets ul/en/i ec60601 - 1 & 60950 - 1 2 nd edition medical / ite switch-mode power supply 3 year warranty
________________________________________ ___________________________________________________ ___________________________________ 2 of 2 sl power electronics corp ? 6050 king drive ventura, ca 93003 ? phone 805.486.4565 ? fax 858.712.2040 ? email: info@slpower.com ? www.slpower.com model number key vv 51 ment 01 1 150 a f "01" = standard. "02" and higher indicates a m odif ied m odel. model output voltage: "12" = 12vdc, "24" = 24vdc, etc. input connector: "f" = iec320 c14 grounded, other options available, contact the factory. output connector: "51" = molex 39-01-3065 or equiv. other options av ailable, contact the factory. model "a" = original configuration product fam ily : "m" = medical, "e" = external, "nt" = model serie s designator output pow er: "150" = 150 watts # of outputs "1" = single output input recept. iec320 - c14 class i grounded (f) #3 output connector - 2.5m m barrel type, center (+) #51 output connector - molex 39-01-2 060 or equiv. mate = molex 39-01-2061 or equiv. data sheet ? 2011 sl power electronics corp. the i nformation and specifications contained herein are believed to be correct at the time of publication. rev. 3-28-2011 however, sl power accepts no responsibility for con sequences arising from reproduction errors or inacc uracies. specifications are subject to change with out notice. model number volts (v) output current (max) max watts ripple (vp-p max) MENT1150a1251f01 12v 11.67 a 140w 120mv MENT1150a1551f01 15v 9.33 a 140w 150mv MENT1150a1851f01 18v 7.78 a 140w 180mv MENT1150a2451f01 24v 6.25 a 150w 240mv MENT1150a2851f01 28v 5.35 a 150w 280mv MENT1150a4851f01 48v 3.12 a 150w 480mv outline drawing MENT1150 universal input 150 watt series medical / ite switch-mode power supply 3 year warranty pin no. wire awg & color desig. 1 18awg red +vout 2 18awg blue gnd 3 18awg green gnd 4 18awg white +vout 5 18awg yellow +vout 6 18awg black gnd connector pinout
|
